kilid nga kolor nga bildo nga bloke sa shower curved wall

Hollow glass block is a kind of non-load-bearing decorative material with sound insulation, heat insulation, waterproof, energy saving and good light transmission.

It is made of two half blanks welded at high temperature. It can be made different according to the size, gidak-on, pattern and color of glass brick and our normal size is 190x190 x80mm. According to the change of size, the straight wall, the glass block in shower curved wall and the glass wall of the discontinuous wall can be designed at home.

Ipadala ang Email Kanato Makigsulti Karon

Detalye Product Feedback karon

Hollow glass block in shower curved wall

Produkto	Hollow glass block in shower curved wall
Kadak-an	19019080mm, 19019095mm, 14514590mm, 14514580mm, 24024080mm, 24011580mm
Kolor	Clear, Bronze, Grey, Green, light Blue, Dark Blue, itom, dalag, purple, pink, etc
Paggamit	Decorative, building, etc
Feature	Previous to light but not transparent Sound insulating High thermal resistance Low conduction of heat High intensity Able to endure corrosion Heat preservation Moist insulation, etc. Fire Resistant
Bayad	30% deposit, 70% after B/L copy
package	carton or carton with pallet
Oras sa paghatud	15 days

kaso kustomer ':

May Kalabutan nga mga Produkto：

ATONG KAAYUHAN:

We havebeen engaged in mosaic and marble field for more than 20 years.
We are trading company with our own factories.
Kita adunay mga dato nga mga kasinatian diha sa trading sakay ug masayud sa daghan nga bahin sa termino trading.

FAQ：

A:How to construction?

The initial construction method:

Prepare the required materials such as glass brick, cement, sand and admixture.
Mix white cement, fine sand, building glue and water in a ratio of 10:10:0.3:3 to form a mortar.
Install the “+” type, “T” type or “L” type positioning bracket.
Use a mortar to build glass bricks layer by layer from bottom to top.
After the glass brick is finished, remove the plates on the positioning bracket.
Use a greasy knife to sew the glass bricks to remove excess mortar.
Wipe the mortar on the glass brick with a damp cloth in time.

The second construction method:

Prepare a sufficient number of "+" fixed spacers and long pieces for determining the level.
The place where the plan is planned to be constructed, the wood frame is pre-made.
After the wood frame is made, the special adhesive for the glass brick is prepared.
Apply the adjusted adhesive on the side of the glass brick, starting from the corner below the frame and laying one by one.
The fixed spacing frame at the edge or corner of the wooden frame should be "L" or "T" to facilitate the fixing of the edge or corner.
After the first piece of glass brick in each row, insert the long piece of wood as a horizontal fixing plate.
After that, remove the outer leakage part of the fixed spacer frame and remove the excess adhesive in the gap.
8-12 hours later, inject different colors of silicone into the gap between the glass bricks to increase the structural strength.