sānu krāsas stikla bloks dušas izliektā sienā

Hollow glass block is a kind of non-load-bearing decorative material with sound insulation, heat insulation, ūdensdrošs, energy saving and good light transmission.

It is made of two half blanks welded at high temperature. It can be made different according to the size, Izmērs, pattern and color of glass brick and our normal size is 190x190 x80mm. According to the change of size, the straight wall, the glass block in shower curved wall and the glass wall of the discontinuous wall can be designed at home.

Nosūtiet mums e-pastu Sazinieties tūlīt

Produkta informācija Atsauksmes tagad

Hollow glass block in shower curved wall

Produkts	Hollow glass block in shower curved wall
Izmērs	19019080mm, 19019095mm, 14514590mm, 14514580mm, 24024080mm, 24011580mm
Krāsa	Clear, Bronze, Pelēks, Green, light Zils, Dark Blue, melns, dzeltens, purple, pink, utt
Pieteikums	Decorative, building, utt
Iezīme	Previous to light but not transparent Sound insulating High thermal resistance Low conduction of heat High intensity Able to endure corrosion Heat preservation Moist insulation, utt. Fire Resistant
Maksājums	30% depozīts, 70% after B/L copy
Iepakojums	carton or carton with pallet
Piegādes laiks	15 days

Klientu lieta:

Saistītie produkti：

MŪSU PRIEKŠROCĪBA:

We havebeen engaged in mosaic and marble field for more than 20 gados.
We are trading company with our own factories.
Mums ir bagāta pieredze tirdzniecībā uz klāja un mēs daudz zinām par tirdzniecības noteikumiem.

biežāk uzdotie jautājumi：

A:How to construction?

The initial construction method:

Prepare the required materials such as glass brick, cement, sand and admixture.
Mix white cement, fine sand, building glue and water in a ratio of 10:10:0.3:3 to form a mortar.
Install the “+” type, “T” type or “L” type positioning bracket.
Use a mortar to build glass bricks layer by layer from bottom to top.
After the glass brick is finished, remove the plates on the positioning bracket.
Use a greasy knife to sew the glass bricks to remove excess mortar.
Wipe the mortar on the glass brick with a damp cloth in time.

The second construction method:

Prepare a sufficient number of "+" fixed spacers and long pieces for determining the level.
The place where the plan is planned to be constructed, the wood frame is pre-made.
After the wood frame is made, the special adhesive for the glass brick is prepared.
Apply the adjusted adhesive on the side of the glass brick, starting from the corner below the frame and laying one by one.
The fixed spacing frame at the edge or corner of the wooden frame should be "L" or "T" to facilitate the fixing of the edge or corner.
After the first piece of glass brick in each row, insert the long piece of wood as a horizontal fixing plate.
After that, remove the outer leakage part of the fixed spacer frame and remove the excess adhesive in the gap.
8-12 hours later, inject different colors of silicone into the gap between the glass bricks to increase the structural strength.