bloco de vidro cor lado no chuveiro parede curva
Hollow glass block in shower curved wall
produtos |
Hollow glass block in shower curved wall |
Tamanho |
190*190*80milímetros, 190*190*95milímetros, 145*145*90milímetros, 145*145*80milímetros, 240*240*80milímetros, 240*115*80milímetros |
Cor | Série de pintura por galvanoplastia, Bronze, Cinzento, Verde, light Azul, Azul escuro, Preto, amarelo, roxo, cor de rosa, etc |
Aplicação | Decorative, prédio, etc |
Característica |
Previous to light but not transparent
Sound insulating High thermal resistance Low conduction of heat High intensity Able to endure corrosion Heat preservation Moist insulation, etc. Fire Resistant |
Pagamento | 30% depósito, 70% after B/L copy |
Pacote | carton or carton with pallet |
Tempo de entrega | 15 dias |
caso dos clientes:
produtos relacionados:
Nossa vantagem:
We havebeen engaged in mosaic and marble field for more than 20 anos.
We are trading company with our own factories.
Temos experiências ricas em negociações a bordo e sabemos muito sobre os termos de negociação.
Perguntas frequentes:
UMA:How to construction?
The initial construction method:
- Prepare the required materials such as glass brick, cement, sand and admixture.
- Mix white cement, fine sand, building glue and water in a ratio of 10:10:0.3:3 to form a mortar.
- Install the “+” type, “T” type or “L” type positioning bracket.
- Use a mortar to build glass bricks layer by layer from bottom to top.
- After the glass brick is finished, remove the plates on the positioning bracket.
- Use a greasy knife to sew the glass bricks to remove excess mortar.
- Wipe the mortar on the glass brick with a damp cloth in time.
The second construction method:
- Prepare a sufficient number of "+" fixed spacers and long pieces for determining the level.
- The place where the plan is planned to be constructed, the wood frame is pre-made.
- After the wood frame is made, the special adhesive for the glass brick is prepared.
- Apply the adjusted adhesive on the side of the glass brick, starting from the corner below the frame and laying one by one.
- The fixed spacing frame at the edge or corner of the wooden frame should be "eu" or "T" to facilitate the fixing of the edge or corner.
- After the first piece of glass brick in each row, insert the long piece of wood as a horizontal fixing plate.
- After that, remove the outer leakage part of the fixed spacer frame and remove the excess adhesive in the gap.
- 8-12 hours later, inject different colors of silicone into the gap between the glass bricks to increase the structural strength.
Recomendação do produto