Bloc lateral de sticlă de culoare duș perete curbat
Hollow glass block in shower curved wall
Produs |
Hollow glass block in shower curved wall |
mărimea |
190*190*80mm, 190*190*95mm, 145*145*90mm, 145*145*80mm, 240*240*80mm, 240*115*80mm |
Culoare | Clear, Bronze, Gri, Verde, light Albastru, Dark Blue, negru, galben, Violet, roz, etc |
cerere | Decorative, building, etc |
Caracteristică |
Previous to light but not transparent
Sound insulating High thermal resistance Low conduction of heat High intensity Able to endure corrosion Heat preservation Moist insulation, etc. Fire Resistant |
Plată | 30% depozit, 70% after B/L copy |
Pachet | carton or carton with pallet |
Timpul de livrare | 15 zi |
cazul clienților:
produse asemanatoare:
Avantajul nostru:
Ne havebeen angajat în domeniul mozaic și marmură pentru mai mult 20 ani.
Suntem o firma de comert cu propriile noastre fabrici.
Avem experiențe bogate în tranzacționare la bord și știu prea multe despre termenii de tranzacționare.
FAQ:
A:How to construction?
The initial construction method:
- Prepare the required materials such as glass brick, cement, sand and admixture.
- Mix white cement, fine sand, building glue and water in a ratio of 10:10:0.3:3 to form a mortar.
- Install the “+” type, “T” type or “L” type positioning bracket.
- Use a mortar to build glass bricks layer by layer from bottom to top.
- After the glass brick is finished, remove the plates on the positioning bracket.
- Use a greasy knife to sew the glass bricks to remove excess mortar.
- Wipe the mortar on the glass brick with a damp cloth in time.
The second construction method:
- Prepare a sufficient number of "+" fixed spacers and long pieces for determining the level.
- The place where the plan is planned to be constructed, the wood frame is pre-made.
- After the wood frame is made, the special adhesive for the glass brick is prepared.
- Apply the adjusted adhesive on the side of the glass brick, starting from the corner below the frame and laying one by one.
- The fixed spacing frame at the edge or corner of the wooden frame should be "L" or "T" to facilitate the fixing of the edge or corner.
- After the first piece of glass brick in each row, insert the long piece of wood as a horizontal fixing plate.
- After that, remove the outer leakage part of the fixed spacer frame and remove the excess adhesive in the gap.
- 8-12 hours later, inject different colors of silicone into the gap between the glass bricks to increase the structural strength.
Etichete:bloc de sticlă transparentă
Recomandare produs