decorative glass blocks
Embalaža iz steklenih blokov & dostava
Podrobnosti o embalaži: Nevtralni paket,6 kosov ine one carton, 1450 cartons in one continer
Podrobnosti o dostavi: Znotraj 15 dni po prejetju vašega pologa
Velikost |
Barva |
Podrobnosti o paketu |
Totalna teža (kg / posoda) |
|
Dimenzije škatle(mm) | Zmogljivost / 20 FCL | |||
190*190*80 | Počisti | 380*252*196mm / 6pcs | 9000kos / 1450 škatle | 21600 |
190*190*80 | Barva | 380*252*196mm / 6pcs | 9000kos / 1450 škatle | 21600 |
190*190*80 | V barvi | 380*252*196mm / 6pcs | 9000kos / 1450 škatle | 21600 |
190*190*95 | Počisti | 385*297*200mm / 6pcs | 7500kos / 1250 škatla | 21600 |
190*190*95 | Barva | 385*297*200mm / 6pcs | 7500kos / 1250 škatla | 21600 |
240*240*80 | Počisti | 416*242*246mm / 5pcs | 5000kos / 1000boxov | 21600 |
Kotni blok | Počisti | 470*235*200mm / 8pcs | 5000kos / 1000boxov | 21600 |
Končni blok | Počisti | 385*252*196mm / 6pcs | 9000kos / 1450 škatle | 21600 |
Ramena blok | Počisti | 385*252*196mm / 6pcs | 9000kos / 1450 škatle | 21600 |
Primer strank:
Podobni izdelki :
THE PREDNOST STEKLENIH BLOKOV:
1.ognjevarna:visoka toplotna odpornost,enojna steklena stena ima enak požarno odporen učinek kot ognjevarna vrata tipa B.
2.varčevanje z energijo:toplotna izolacija,nizka prevodnost toplote.
3.odporen proti zmrzali,vlažna izolacija.
4.varnost:visoka intenzivnost.
5.čudovit dekorativni učinek:čudovito ali elegantno ali veličastno ali kot si lahko predstavljate.
Serija:jasno sereis,polnobarvna serija,stransko obarvane serije,kislinske serije,barvne serije.
Velikost:190*190*80mm,
190*190*95mm,
145*145*90mm,
145*145*80mm,
240*240*80mm,
240*115*80mm.
Pogosta vprašanja:
A:Features and applications?
B:
velikost | Features and applications | ||
L(mm) | W(mm) | thick(mm) | |
190 | 190 | 80 | Appropriate size, wide and medium, can cater to the general needs, is a common brick for various walls, partitions, and other buildings. It is a conventional glass brick with relatively full color and is widely used at home and abroad. |
240 | 240 | 80 | The unit area is relatively large, and it is easy to maintain the overall effect of the wall surface. It is simple and simple, and it is elegant and far-sighted. It is especially suitable for large-area wall and partition masonry, especially in combination with other specifications. |
190 | 190 | 95 | Heavy, sturdy, trpežna, medium-sized, safe and reliable, suitable for all kinds of exposed fences, supporting exterior walls of buildings, and other isolation walls. Garden villas, residential upper areas, and exterior walls of public buildings mostly like it. . |
145 | 145 | 95(80) | Exquisite and beautiful, it is suitable for use in the walls of high-end business and office areas. It is the most popular wall material in foreign countries (especially in Japan). |
115 | 115 | 80 | The pocket version of the glass brick, from the KST, is used with 240*240*80mm glass bricks. The combination is flexible and the effect is outstanding. |
how to install?
Safety First
A wall of glass blocks is heavy, so it's important to check that the floor below can take the weight - especially if you're building on a suspended wooden floor. If you're in any doubt, get some professional advice before you start your project.
Step 1
Nail an expansion strip to the sides of the frame at intervals, stop just short of the bottom of the frame so you can fit a spacer in. Then mix the mortar until it's smooth and lay a bed of it on the bottom of the frame (the sill). Use enough mortar to give you a 10mm joint when your blocks are in place.
Step 2
Starting at one corner, place an L-shaped spacer against the frame and a T-shaped spacer to support the other end of the block (use one of the blocks to mark out the right position).
Step 3
Lay the first block in the corner and bed it down firmly onto the spacers.
Step 4
Put the next T-shaped spacer in place, and add enough mortar to the side of the second block to fill the cavity between the blocks. Then sit the second block on the spacers and push it against the first block, making sure it fits snugly on the spacers.
Step 5
Carry on until the first row is complete - checking from time to time with a spirit level to make sure it's straight. Put mortar on top of the first row and bed in full spacers between the blocks. You're now ready to lay the second row!
Step 6
Use a craft knife to cut the expansion strip level with the second row of blocks.
Step 7
Lift the expansion strip and screw a panel anchor to the side of the frame at either end of the row. Then drop the strip back over the vertical arm of the anchor. Its horizontal arm should fit over the block and the spacers - cover it with mortar and continue laying the blocks.
Step 8
Clean the face of the blocks with a damp sponge from time to time as you work.
Priporočilo za izdelek