پروڈکٹ کا جائزہ

آئٹم:مسدس پچی کاری ٹائلیں - وائٹ سیاہ سرامک پچی کاری

مواد: چینی مٹی

سائز:25x26mm; Length300 x Diameter260mm;12.82piece=1sqm

موٹائی:6ملی میٹر

اوپری علاج: چمکیلی

رنگ:White,سیاہ, Gray

Backside process:Mesh backing

قابل اطلاق منظر：باتھ روم, شاور, باورچی خانه, ریستوراں, دیواریں, floor...

پیداوار وقت: اس کے پیدا کرنے کے لئے کچھ وقت لگے گا (تقریبا. 1-2 ہفتے) .

کرافٹ کی قسم: Home improvement, Mosaic making

پیکیج:20ٹکڑے / carton کے;1.56M2 / carton کے;

اندرونی پیکیجنگ کارٹن，بیرونی پیکیجنگ لکڑی کے پیلیٹوں سے بنی ہے, اور لکڑی کے پیلیٹوں سے الگ الگ چارج کیا جاتا ہے.

ادائیگی کا طریقہ：T / T; مغربی اتحاد; پے پال，وغیرہ.

شپنگ

سائز کے حساب سے شپنگ کے اخراجات کا تعین کیا جائے گا, قسم, اور مقام.

ہمارا فائدہ:

Waterproof

Anti-slip

Fire prevention

Clients'case:

متعلقہ مصنوعات:

عمومی سوالات:

How much is your tile for Hexagon Mosaic Tiles - وائٹ سیاہ سرامک پچی کاری?

Our tile ranges in cost per square foot, depending on the pattern and quantity you order. When you browse our tile products, retail pricing is published for each pattern within the collections.

Can I have samples of your tile for Hexagon Mosaic Tiles - وائٹ سیاہ سرامک پچی کاری?

آپ کر سکتے ہیں. Sample packs are available for purchase , or you can purchase an individual sample by visiting any tile page.

Installation & Care

How is the tile laid out? How will it arrive?

This all depends on your project. Generally we glue and lay out mosaics on mesh, which we then cut down and provide instruction so you can install them easily.(if it's custom). We also have collections that mould mounted for your reference. All of your tile will be packed in boxes securely and arrive to your place without any damage.

How do I install the tile for Hexagon Mosaic Tiles - وائٹ سیاہ سرامک پچی کاری?

1.Lay out the location of the backsplash on the wall.

2.Apply thin-set adhesive to the wall using a notched trowel.

3.Position the sheet on the wall, and press it into the wet thin-set adhesive.

4.Use a utility knife to cut through the mesh on the sheet of tile around the outlet.

5.Cut the tile to size using a special tile saw that available for rent at tool centers.

6.Allow the thin-set adhesive to dry overnight.

7.Remove any protruding thin-set from the tile joints with a flat-head screwdriver.

8.Dampen the surface of the tile with water on a sponge before applying grout.

9.Use a rubber float to apply the grout to the tile joints, pressing the grout into the tile at a 45° angle.

10.When the grout starts to set, go over the tile surface several times with a sponge dampened with water to wipe off any excess grout.

11.After the grout has dried, use a soft cloth to remove any grout haze from the surface.