Mahsulot haqida umumiy ma'lumot

Mahsulot:Olti burchakli mozaik plitkalar - Oq qora sopol mozaika

Materiallar: seramika

Hajmi:25x26mm; Length300 x Diameter260mm;12.82piece=1sqm

Qalinligi:6mm

Yuzaki ishlov berish: Yorqin

Rang:Oq,Qora, Gray

Backside process:Mesh backing

Amaldagi sahna：hammom, dush, oshxona, restoran, Devorlar, qavat ...

Ishlab chiqarish vaqti: ishlab chiqarish uchun biroz vaqt kerak bo'ladi (taxminan. 1-2 hafta) .

Craft type: Home improvement, Mosaic making

Paket:20parcha / karton;1.56m2 / quti;

Inner packaging carton，The outer packaging is made of wooden pallets, and the wooden pallets are charged separately.

payment method：T/T; Western Union; PayPal，va boshqalar.

yuk tashish; yetkazib berish

Shipping costs will be determined by size, type, and location.

Bizning afzalligimiz:

Waterproof

Anti-slip

Fire prevention

Clients'case:

Related Products:

Tss:

How much is your tile for Hexagon Mosaic Tiles - Oq qora sopol mozaika?

Bizning plitkalarimiz kvadrat metr uchun narxlar, depending on the pattern and quantity you order. Plitka mahsulotlarini ko'rib chiqayotganda, chakana narxlar to'plamlar ichidagi har bir naqsh uchun e'lon qilinadi.

Can I have samples of your tile for Hexagon Mosaic Tiles - Oq qora sopol mozaika?

Siz .. qila olasiz; siz ... mumkin. Sample packs are available for purchase , or you can purchase an individual sample by visiting any tile page.

O'rnatish & Care

How is the tile laid out? How will it arrive?

This all depends on your project. Generally we glue and lay out mosaics on mesh, which we then cut down and provide instruction so you can install them easily.(if it's custom). We also have collections that mould mounted for your reference. All of your tile will be packed in boxes securely and arrive to your place without any damage.

How do I install the tile for Hexagon Mosaic Tiles - Oq qora sopol mozaika?

1.Lay out the location of the backsplash on the wall.

2.Apply thin-set adhesive to the wall using a notched trowel.

3.Position the sheet on the wall, and press it into the wet thin-set adhesive.

4.Use a utility knife to cut through the mesh on the sheet of tile around the outlet.

5.Cut the tile to size using a special tile saw that available for rent at tool centers.

6.Allow the thin-set adhesive to dry overnight.

7.Remove any protruding thin-set from the tile joints with a flat-head screwdriver.

8.Dampen the surface of the tile with water on a sponge before applying grout.

9.Use a rubber float to apply the grout to the tile joints, pressing the grout into the tile at a 45° angle.

10.When the grout starts to set, go over the tile surface several times with a sponge dampened with water to wipe off any excess grout.

11.After the grout has dried, use a soft cloth to remove any grout haze from the surface.