Tổng quan sản phẩm
Mục:Hình lục giác Gạch Mosaic - Trắng Đen Mosaic gốm
Vật chất: gốm sứ
Kích thước:25x26mm; Length300 x Diameter260mm;12.82piece=1sqm
Độ dày:6mm
xử lý bề mặt: Bóng
Màu:trắng,Đen, màu xám
Quy trình mặt sau:ủng hộ lưới
cảnh áp dụng:phòng tắm, vòi hoa sen, phòng bếp, nhà hàng, Tường, sàn nhà...
Thời gian sản xuất: nó sẽ mất một thời gian để sản xuất (xấp xỉ. 1-2 tuần) .
Loại thủ công: Home improvement, Mosaic making
gói:20mảnh / thùng carton;1.56m2 / thùng carton;
Bao bì bên trong thùng carton,Bao bì bên ngoài được làm bằng pallet gỗ, và các pallet gỗ được tính phí riêng.
phương thức thanh toán:T / T; Western Union; PayPal,vv.
Đang chuyển hàng
Chi phí vận chuyển sẽ được xác định theo quy mô, kiểu, và vị trí.
lợi thế của chúng tôi:
Waterproof
Anti-slip
Fire prevention
Khách hàng:
những sản phẩm liên quan:
Hỏi đáp:
How much is your tile for Hexagon Mosaic Tiles - Trắng Đen Mosaic gốm?
dãy ngói của chúng tôi chi phí cho mỗi foot vuông, depending on the pattern and quantity you order. Khi bạn duyệt các sản phẩm gạch của chúng tôi, giá bán lẻ được công bố cho từng mẫu trong bộ sưu tập.
Can I have samples of your tile for Hexagon Mosaic Tiles - Trắng Đen Mosaic gốm?
Bạn có thể. Sample packs are available for purchase , or you can purchase an individual sample by visiting any tile page.
Cài đặt & Quan tâm
How is the tile laid out? How will it arrive?
This all depends on your project. Generally we glue and lay out mosaics on mesh, which we then cut down and provide instruction so you can install them easily.(if it's custom). We also have collections that mould mounted for your reference. All of your tile will be packed in boxes securely and arrive to your place without any damage.
How do I install the tile for Hexagon Mosaic Tiles - Trắng Đen Mosaic gốm?
1.Lay out the location of the backsplash on the wall.
2.Apply thin-set adhesive to the wall using a notched trowel.
3.Position the sheet on the wall, and press it into the wet thin-set adhesive.
4.Use a utility knife to cut through the mesh on the sheet of tile around the outlet.
5.Cut the tile to size using a special tile saw that available for rent at tool centers.
6.Allow the thin-set adhesive to dry overnight.
7.Remove any protruding thin-set from the tile joints with a flat-head screwdriver.
8.Dampen the surface of the tile with water on a sponge before applying grout.
9.Use a rubber float to apply the grout to the tile joints, pressing the grout into the tile at a 45° angle.
10.When the grout starts to set, go over the tile surface several times with a sponge dampened with water to wipe off any excess grout.
11.After the grout has dried, use a soft cloth to remove any grout haze from the surface.
Đề xuất sản phẩm