decorative glass blocks
Glass block packaging & delivery
Packaging Detail: Gói trung lập,6 miếng ine one carton, 1450 cartons in one continer
Delivery Detail: ở trong 15 days after received your deposit
Kích thước |
Màu |
Package Details |
Total Weight (kg / Container) |
|
Kích thước của hộp(mm) | Công suất / 20 FCL | |||
190*190*80 | Sạch | 380*252*196mm/6pcs | 9000pcs/1450boxes | 21600 |
190*190*80 | Màu | 380*252*196mm/6pcs | 9000pcs/1450boxes | 21600 |
190*190*80 | In-color | 380*252*196mm/6pcs | 9000pcs/1450boxes | 21600 |
190*190*95 | Sạch | 385*297*200mm/6pcs | 7500pcs/1250boxes | 21600 |
190*190*95 | Màu | 385*297*200mm/6pcs | 7500pcs/1250boxes | 21600 |
240*240*80 | Sạch | 416*242*246mm/5pcs | 5000pcs/1000boxes | 21600 |
Corner block | Sạch | 470*235*200mm/8pcs | 5000pcs/1000boxes | 21600 |
End block | Sạch | 385*252*196mm/6pcs | 9000pcs/1450boxes | 21600 |
Shoulder block | Sạch | 385*252*196mm/6pcs | 9000pcs/1450boxes | 21600 |
trường hợp khách hàng:
những sản phẩm liên quan :
THE ADVANTAGE OF GLASS BLOCKS:
1.fire-resistant:high thermal resistance,single glass block wall has the same fire resistant effect as fireproof door type B.
2.energy-saving:cách nhiệt,low conduction of heat.
3.sương chịu,moist insulation.
4.safety:high intensity.
5.wonderful decoration effect:splendid or elegant or majestic or as you can imagine.
Loạt:clear sereis,full color series,side-colored series,acid series,in-colored series.
Kích thước:190*190*80mm,
190*190*95mm,
145*145*90mm,
145*145*80mm,
240*240*80mm,
240*115*80mm.
Hỏi đáp:
Một:Các tính năng và ứng dụng?
B:
kích thước | Các tính năng và ứng dụng | ||
L(mm) | W(mm) | dày(mm) | |
190 | 190 | 80 | kích thước phù hợp, rộng và vừa, có thể phục vụ cho các nhu cầu chung, là một viên gạch phổ biến cho các bức tường khác nhau, phân vùng, và các công trình khác. Đó là một viên gạch kính thông thường với tương đối đầy đủ màu sắc và được sử dụng rộng rãi trong và ngoài nước. |
240 | 240 | 80 | Các đơn vị diện tích tương đối lớn, và nó rất dễ dàng để duy trì hiệu quả tổng thể của bề mặt tường. Nó là đơn giản và đơn giản, và nó là tao nhã và nhìn xa trông rộng. Nó đặc biệt thích hợp cho tường lớn diện tích và phân vùng nề, đặc biệt là khi kết hợp với thông số kỹ thuật khác. |
190 | 190 | 95 | Nặng, mạnh mẽ, bền chặt, kích thước trung bình, an toàn và đáng tin cậy, thích hợp cho tất cả các loại hàng rào tiếp xúc, hỗ trợ tường bên ngoài của tòa nhà, và các bức tường cách ly khác. biệt thự vườn, khu vực dân cư trên, và các bức tường bên ngoài của tòa nhà công cộng chủ yếu như nó. . |
145 | 145 | 95(80) | Tinh tế và đẹp, nó là thích hợp để sử dụng trong các bức tường của lĩnh vực kinh doanh và văn phòng cao cấp. Nó là vật liệu tường phổ biến nhất ở nước ngoài (đặc biệt là ở Nhật Bản). |
115 | 115 | 80 | Phiên bản bỏ túi của gạch kính, from the KST, được sử dụng với 240 * 240 * 80mm gạch kính. Sự kết hợp linh hoạt và hiệu quả là nổi bật. |
how to install?
Safety First
A wall of glass blocks is heavy, so it's important to check that the floor below can take the weight - especially if you're building on a suspended wooden floor. If you're in any doubt, get some professional advice before you start your project.
Bươc 1
Nail an expansion strip to the sides of the frame at intervals, stop just short of the bottom of the frame so you can fit a spacer in. Then mix the mortar until it's smooth and lay a bed of it on the bottom of the frame (the sill). Use enough mortar to give you a 10mm joint when your blocks are in place.
Bươc 2
Starting at one corner, place an L-shaped spacer against the frame and a T-shaped spacer to support the other end of the block (use one of the blocks to mark out the right position).
Bươc 3
Lay the first block in the corner and bed it down firmly onto the spacers.
Bươc 4
Put the next T-shaped spacer in place, and add enough mortar to the side of the second block to fill the cavity between the blocks. Then sit the second block on the spacers and push it against the first block, making sure it fits snugly on the spacers.
Bươc 5
Carry on until the first row is complete - checking from time to time with a spirit level to make sure it's straight. Put mortar on top of the first row and bed in full spacers between the blocks. You're now ready to lay the second row!
Bươc 6
Use a craft knife to cut the expansion strip level with the second row of blocks.
Bươc 7
Lift the expansion strip and screw a panel anchor to the side of the frame at either end of the row. Then drop the strip back over the vertical arm of the anchor. Its horizontal arm should fit over the block and the spacers - cover it with mortar and continue laying the blocks.
Bươc 8
Clean the face of the blocks with a damp sponge from time to time as you work.
Đề xuất sản phẩm