Muhtasari wa Bidhaa
item:Matofali ya Musa ya Hexagon - Musa ya Kauri Nyeusi Nyeusi
Material: kauri
Saizi:25x26mm; Length300 x Diameter260mm;12.82piece=1sqm
Unene:6mm
Matibabu ya uso: Glossy
Rangi:Nyeupe,Nyeusi, Gray
Backside process:msaada matundu
Eneo linalotumika:bafuni, oga, jikoni, mgahawa, Walls, floor...
Wakati wa uzalishaji: it will take some time to produce (takriban. 1-2 wiki) .
Craft type: Home improvement, Mosaic making
mfuko:20kipande / katoni;1.56m2 / sanduku;
Inner packaging carton,The outer packaging is made of wooden pallets, and the wooden pallets are charged separately.
payment method:T / T.; Western Union; PayPal,na kadhalika.
Usafirishaji
Gharama za usafirishaji zitaamuliwa na saizi, aina, na mahali.
Faida yetu:
Waterproof
Anti-slip
Fire prevention
Kesi ya wateja:
Bidhaa Zinazohusiana:
Maswali:
How much is your tile for Hexagon Mosaic Tiles - Musa ya Kauri Nyeusi Nyeusi?
Tile zetu ni kati ya gharama kwa kila futi ya mraba, depending on the pattern and quantity you order. Unapovinjari bidhaa zetu za vigae, bei ya rejareja huchapishwa kwa kila muundo ndani ya makusanyo.
Can I have samples of your tile for Hexagon Mosaic Tiles - Musa ya Kauri Nyeusi Nyeusi?
Unaweza. Sample packs are available for purchase , or you can purchase an individual sample by visiting any tile page.
Ufungaji & Care
How is the tile laid out? How will it arrive?
This all depends on your project. Generally we glue and lay out mosaics on mesh, which we then cut down and provide instruction so you can install them easily.(if it's custom). We also have collections that mould mounted for your reference. All of your tile will be packed in boxes securely and arrive to your place without any damage.
How do I install the tile for Hexagon Mosaic Tiles - Musa ya Kauri Nyeusi Nyeusi?
1.Lay out the location of the backsplash on the wall.
2.Apply thin-set adhesive to the wall using a notched trowel.
3.Position the sheet on the wall, and press it into the wet thin-set adhesive.
4.Use a utility knife to cut through the mesh on the sheet of tile around the outlet.
5.Cut the tile to size using a special tile saw that available for rent at tool centers.
6.Allow the thin-set adhesive to dry overnight.
7.Remove any protruding thin-set from the tile joints with a flat-head screwdriver.
8.Dampen the surface of the tile with water on a sponge before applying grout.
9.Use a rubber float to apply the grout to the tile joints, pressing the grout into the tile at a 45° angle.
10.When the grout starts to set, go over the tile surface several times with a sponge dampened with water to wipe off any excess grout.
11.After the grout has dried, use a soft cloth to remove any grout haze from the surface.
Mapendekezo ya bidhaa