building glass blocks for living rooms
building glass blocks for living rooms
building glass blocks for living rooms
building glass blocks for living rooms
building glass blocks for living rooms
building glass blocks for living rooms

Chemical composition of the building glass blocks is advanced glass sand, soda ash, quartz powder, silicate inorganic mineral raw materials to melt temperature, and after finishing, is no radioactive substances and hydrocarbons, aldehydes and other elements pungent odor, free of The human body has infringing substances and belongs to green building materials.

Product Detail Feedback now

building glass blocks


Item: building glass blocks
Model Number: PARALLEL
Material: Glass
size: 190x190mm

Thickness: 80mm
Shipping: 5~10days lead time. By vessel,DHL/TNT/FedEx express, air freight etc.
Colour: Blue, green, gray, brown, red, clear, etc.
Delivery & Service: Timely delivery each time. Provide reliable service . Provide construction suggestions and solutions. Our target is to satisfy every customer with the best service.
MOQ 1000piece
Package Standard cartons packing
6piece/cartons; 14KG/cartons;0.19CMB;
Or with pallet


Interior and outside decoration, wall and floor.
H washing room, window, home, dinning room, sittingroom, toilet, balcony,

C ommercial space, bedroom

Project movie theater,disco,bar,club,hotel,library,showroom.ect

Customers’ case:

Elated Products:


We have rich experiences in trading aboard and know much about trading terms.
We can provide different kinds of buying services like sourcing, QC checking,containers loading and so on.



A: How to produce? Production Process?

B:There are two production methods, namely welding and bonding.

1. The welding process is as follows:

Raw material mixing→melting→cutting→pressing half blank→welding→annealing→inspection→painting→packaging

2.Bonding method

Inserting the side walls of the two concave half glass bricks into the grooves of the thermoplastic plastic ring member with the H-shaped section, and by means of the sealing material, the surface of the profile is softened under the action of temperature and extrusion, thereby The concave half-piece glass bricks are firmly bonded together to form an integral hollow glass brick.

Compared with the welding method, the bonding method has low cost and accurate product size, but the strength is far lower than that of the welding method.

A: Use of this product?

B: Usually room space do not want to have a dark room (light room no) occurs, even if the walkway also desirable to have light. The use of glass bricks not only has the function of partitioning, but also leads the light into the inside, and has good sound insulation effect. Glass bricks can be applied to exterior walls or indoor spaces to provide good daylighting and a sense of continuity. Whether it's a single inlay or a whole wall, it's a finishing touch.

The glass brick is applied to the outer door to bring natural light and outdoor scenery into the room. The brick has high strength and durability, can withstand the wind attack, and can ensure safety without additional maintenance structure.

A: How construction?

B:first is mortar preparation (according to white cement: fine sand: building glue: water = 10:10:0.3:3 ratio), then install the positioning bracket ("+" type or "T" type or "L" type) and use The mortar bricks remove the excess plates on the positioning bracket. First use a greasy knife to sew and remove excess mortar. After removing the mortar, the glass brick can be formed.

▲You can also prepare the "+" fixed spacer frame and the horizontal wood chips (width about 5cm, thickness not more than 0.4cm) for the level of the planned construction, make the wooden frame, blend the special adhesive, and brush Evenly. Starting from the corner below the frame, the blocks are made of glass bricks. Be sure to place the fixed spacers at the four corners.

Remove the outer leakage portion of the fixed spacer frame and remove excess adhesive from the gap. After 8 to 12 hours of adhesive drying, different colors of silicone rubber can be injected into the gap of the glass brick to increase the structural strength.


Send your message to us:

Product recommendation